Configure your Arc.
Start with the range you are after — a single module, two modules joined by a breezeway, a larger kit dwelling at 16′-5″ or 19′-8″, or a sauna pavilion. Then set the widths and lengths below to build your layout, and pick a finish and exterior color. Pricing updates live below as you go, shown across all three Arc supply pathways — Kit Supply, Lock-up Supply and Modular (completed) — so you can compare before you decide.
Module A — bedroom wing
The sleeping wing. Bedrooms and the family bath off a hallway that runs along the breezeway edge.
Module B — living wing
A pair is one services spine split across two modules: the bedroom wing carries the bath and laundry, the living wing carries the kitchen. Joined by a breezeway between the long sides — never a shared wall, never a right angle, never end to end. Each wing can be delivered differently, too — one arrives finished, the other as a kit you build on site, if that suits your project.
Standard Elements sample room — finish reference only.
Standard cladding sample — color reference only.
Module width
Above 14′-9″ wide, the road decides for you
A finished module is a road load, and width is what governs it. Tennessee lets 8′-6″ travel with no permit at all. Past that you are on an oversize permit, and the conditions step up with every foot: up to 10′-0″ needs no escort, 10′-0″ to 12′-6″ picks up a front escort on narrow two-lane roads, and from 13′-6″ to 16′-0″ a front and rear escort are required on every highway, per the TDOT oversize movement rules. Above 16′-0″ the move leaves the routine permit system altogether and is assessed case by case as a special-provision load.
That 16′-0″ ceiling is why the ladder splits where it does. At 14′-9″ an Arc module is still a permitted oversize load with escorts, so we can hand it over complete. At 16′-5″ and 19′-8″ it no longer fits the permit, so the same engineered building is supplied as a kit on 12 in channel portals and assembled on your site. It isn’t a lesser option — it’s the only honest one at that width.
Can we change the internal layout?
Yes — almost entirely. The structure carries on the perimeter and on portal frames at 13′-1½″ centers, so no wall inside the building is load bearing. Move a bedroom wall, open the living end up, relocate a doorway: none of it touches the engineering.
What's fixed is the perimeter and the wet-area positions, because those are what let us engineer and price the building repeatably. Inside that boundary the layout is yours, and at 16′-5″ and 19′-8″ we draw it with you from scratch rather than ask you to pick a plan off a list.
Module length
Finish — Elements palette
Cosmetic selection only — the drawing stays monochrome. Color and finish apply to Elements joinery, not the structural drawing.
Exterior color — Cladding
Cosmetic selection only — the drawing stays monochrome. Color applies to external cladding, not the structural drawing.
Finished view — single module · Monument
Indicative render, matched to your layout and cladding color — not redrawn to your exact width and length.
Full configuration spec
This shows how the system could combine. Overall dimensions and floor areas are not labelled on the drawing because they are not yet confirmed for any combined layout. The “starting from” prices above are separate, indicative estimates only — not a quote.
Your pavilion — Sauna
—
Render of the issued design. Cold plunge and landscaping shown are not included.
Specification
Both pavilions are one fixed design, so there is nothing to size. Pick the single sauna or the pair, and the price is the price.
Send this through as an inquiryIncluded. Not included.
Included
Not included
—
Nothing has been sent yet.
Your configuration is saved. Where next?
Stage 3 of 6 is done. Everything you've set here carries forward automatically — you won't re-enter any of it.
—
Send this to Arc
Add your contact details and your building comes through with it, and we'll be in touch.
Send this to Arc Optional, before you sendChoose your interior selections
Your kitchen is already specified. Choose your internal doors and your floors, see an indicative figure, and it carries into your inquiry. You can skip it.
Choose doors and floorsNot ready to inquire yet?
Download your design.
Add Arc Elements later
Arc Elements is Arc's integrated internal wall, door and joinery system. It can be designed and specified after your final building layout and interior requirements are confirmed.
Discuss Arc ElementsNothing has been sent yet. The prices shown are indicative estimates, not a quote.